Town and Country fires have designed two different heights of the Town and Country Fires Langdale to enable the stove to fit into either an open plan room or a smaller fireplace. The overall look of the stove lends itself to either a modern contemporary room setting or a traditional inglenook. The stove is very controllable with a great clean burn system and as an added bonus, the flames can be viewed from three sides.
- 7.5kw output
- British made
- 6″ flue
- Bespoke engineered handle
- View from 3 sides
- Tertiary air
- Discrete convection chambers
- Stainless steel ashpan
- Suitable for both inside and outside air
- Optional remote control
- Low and high model available
- Maximum log length 400mm
- Weight 100kg
- DEFRA approved smoke control
- Black is standard – but 9 colours are available
- Town and Country Fires recommend purchase only through an approved local stockist
- 10 year guarantee (must be purchased from approved stockist and fitted by a qualified installer)
View pdf file showing minimum clearances required from combustible materials
View pdf file showing Langdale dimensions and emissions comparisons.
The Town and Country Fires Langdale is a new innovative stove that really brings something new to the Town and Country Fires range. Designed in house by their own designer and built and engineered in their factory in Pickering.
Unlike most stoves in this sector, Town and Country Fires have developed the Langdale to burn as a multifuel stove which offers you more flexibility if your dry log supply runs out.
The Town and Country Fires Langdale is available as a DEFRA approved smoke control stove and can be supplied with an outside air kit which is now a requirement in a lot of new build properties. This model is also available with a remote control if required.
All Town and Country Fires stoves have an air wash to the glass which works extremely well. Most have tertiary air at the rear of the firebox too, which burns off gases at the back of the fire that do not normally ignite, thus giving a very clean burn, causing less pollution in the atmosphere. Town and Country Fires are one of the very few stove people who actually make their stoves from start to finish in Pickering, North Yorkshire.
Town and Country Fires recommend that customers buy Town and Country Fires stoves only from a local, recognised stockist. If products are purchased from a non-approved source, they cannot guarantee that the product purchased is an up-to-date model with the latest features, nor can they be sure that the potential customer will have been given the best advice regarding suitability and installation.
The Town and Country Fires Langdale is named after a valley called Langdale End. It is set within the North Yorkshire Moors National Park and is on the edge of Dalby Forest. Langdale End has a small cluster of buildings, one being The Moorcock Inn which has been owned by the same family for over 100 years.
The full range of Town and Country Fires solid fuel and woodburning stoves all carry certified ratings and comply with BS EN 13240:2001+ A2:2004 and BS EN 13229:2001 +A12003 +A2:2004. They are also HETAS approved and CE marked.
Town and Country Fires design and perfect the combustion in the stoves, so that they out perform some of the very best stoves across the world. They buy British steel, cut it accurately with a laser cutter, then bend it with a CNC press. The metal formed shapes are then passed to their robot welder which produces high penetration and extremely accurate joints. Once the bodies have been produced in this way, they are finished by hand which includes shot blasting to enable a good penetration of paint. Some of the stoves are completely hand made by staff who have worked for Town and Country Fires for many years.