The Town and Country Fires Welburn stove is available in two styles, one low version and one higher design with a built in log store. The door of the Town and Country Fires Welburn stove has a magnificent curved glass giving an amazing view of the fire. This is certainly a focal point for any room.
There is a heat shield supplied with the Town and Country Fires Welburn stove, which fits on the back panel. If this is fitted, allow an additional 30mm to the depth shown on the diagram.
All Town and Country Fires stoves have an air wash to the glass which works extremely well. Most have tertiary air at the rear of the firebox too, which burns off gases at the back of the fire that do not normally ignite, thus giving a very clean burn, causing less pollution in the atmosphere. Town and Country Fires are one of the very few stove people who actually make their stoves from start to finish in Pickering, North Yorkshire.
Town and Country Fires recommend that customers buy Town and Country Fires stoves only from a local, recognised stockist. If products are purchased from a non-approved source, they cannot guarantee that the product purchased is an up-to-date model with the latest features, nor can they be sure that the potential customer will have been given the best advice regarding suitability and installation.
The Town and Country Fires Welburn stove – Welburn is a village with North Yorkshire and is close to Castle Howard. The village has a Primary School, pub, bakery and cafe ensuring the community continues to thrive.
The full range of Town and Country Fires solid fuel and woodburning stoves all carry certified ratings and comply with BS EN 13240:2001+ A2:2004 and BS EN 13229:2001 +A12003 +A2:2004. They are also HETAS approved and CE marked.
Town and Country Fires design and perfect the combustion in the stoves, so that they out perform some of the very best stoves across the world. They buy British steel, cut it accurately with a laser cutter, then bend it with a CNC press. The metal formed shapes are then passed to their robot welder which produces high penetration and extremely accurate joints. Once the bodies have been produced in this way, they are finished by hand which includes shot blasting to enable a good penetration of paint. Some of the stoves are completely hand made by staff who have worked for Town and Country Fires for many years.