Once a good fire is established in the Town and Country Fires Bransdale stove, it can be controlled by the two air vents near the top of the stove, making it easy to operate. The Town and Country Fires Bransdale stove is beautifully proportioned and the only way to appreciate this remarkable stove is to see it working. The multifuel grate will burn wood or solid fuel without any alterations in the grate.
As well as the flat top version, there are two optional slide on canopies available for the Town and Country Fires Bransdale stove. Both available as either a top or rear flue outlet. With a high canopy on a Bransdale, the overall height including stove measures 940mm, and with a low canopy 805mm.
There is also a heat shield supplied with the Town and Country Fires Bransdale stove which fits on the back panel. It this is fitted allow an additional 30mm to the depth shown on the diagram.
All Town and Country Fires stoves have an air wash to the glass which works extremely well. Most have tertiary air at the rear of the firebox too, which burns off gases at the back of the fire that do not normally ignite, thus giving a very clean burn, causing less pollution in the atmosphere. Town and Country Fires are one of the very few stove people who actually make their stoves from start to finish in Pickering, North Yorkshire.
Town and Country Fires recommend that customers buy Town and Country Fires stoves only from a local, recognised stockist. If products are purchased from a non-approved source, they cannot guarantee that the product purchased is an up-to-date model with the latest features, nor can they be sure that the potential customer will have been given the best advice regarding suitability and installation.
The Town and Country Fires Bransdale – Bransdale is a beautiful valley set within the North Yorkshire Moors, north of Helmsley. Much of the dale is owned by the National Trust and is said to be one of the most isolated dales in the moors.
The full range of Town and Country Fires solid fuel and woodburning stoves all carry certified ratings and comply with BS EN 13240:2001+ A2:2004 and BS EN 13229:2001 +A12003 +A2:2004. They are also HETAS approved and CE marked.
Town and Country Fires design and perfect the combustion in the stoves, so that they out perform some of the very best stoves across the world. They buy British steel, cut it accurately with a laser cutter, then bend it with a CNC press. The metal formed shapes are then passed to their robot welder which produces high penetration and extremely accurate joints. Once the bodies have been produced in this way, they are finished by hand which includes shot blasting to enable a good penetration of paint. Some of the stoves are completely hand made by staff who have worked for Town and Country Fires for many years.